Bison chair lift manual

Remember the team at Bm Stairlifts have countless years of experience repairing, servicing and installing all Bison Stairlifts.

So, contact the office on 01 on info bmstairlifts. Remember we are nationwide! Stairlifts Prices — Continued As we mentioned in our previous blog post, the factors that are attributed to stairlifts prices are: design […].

All you need to know about stair lift prices in Ireland. You can find it here. Whenever I turn it on, even in programming mode, it clicks once fairly loud and then displays a zero with a flashing dot to the lower right.

Anybody have an idea what the problem could be? The overspeed governor is on the back of the stairlift carriage and can be accessed by removing the covers. It sits in between the drive motor and the leveling motor. The purpose of the OSG is to stop the stairlift in the event that the stairlift is going to fast. The overspeed governor is like a mouse trap that needs to be set and can easily be tripped causing this error code. You can manually reset it by pressing a black tab at the back of the lift and making sure the plunger switch is held open by the white plastic tab on the plastic ring.

Remove the front cover by unscrewing the two philips screws and removing them. Find the two long batteries on either side of the circuit board. Take a picture of them so that you will know how to reconnect the wires. Undo the positive wire and then the negative wire on each of the batteries one at a time. Pull the batteries out slowly as they are attached by velcro. Note the name and number on the batteries and do a search for them online. You should be able to find replacement batteries at around half of the price of the manufacturer.

Reinstall the batteries the opposite way you to them out. You will notice that the display gives an odd symbol and that the chairlift is inoperable. This is easy to fix. This will allow you to move the chairlift.

Move it up to the top charging terminal and stop a couple of inches before you reach it. Unplug the positive battery cable on the right battery. Plug it back in. Next Page. Page 2: Introducing Your Stairlift Issue 3 - March Introducing Your Stairlift Congratulations on becoming the owner of a Bison 50 Stairlift, which has been manufactured specifically to meet your requirements. It has a month Bison warranty and will provide you with many years of reliable service.

The Stairlift is moved up and down the stairs by the user operating the Direction Controller on the armrest 1. If calling via the remote control please see section 5. During normal operation it will display these symbols: Stairlift is in Standby Condition and ready to use.

Page 8: Hand Winding Replace the remote control batteries annually. Your Stairlift is designed to operate smoothly and quietly. The equivalent continuous A Acorn User manual for the model Acorn Acorn Superglide User manual for the original model Acorn Superglide.

Acorn Curved User manual for the model Acorn curved. Handicare User manual for new Handicare Handicare Curved User manual for the Handicare model curved.